Logic device/transceiver/encoder

The MC10EL/100EL32 is an integrated divide-by-2. Differential clock inputs and VBB allow differential, single-ended, or AC-coupled interfaces to the device. If the VBB output is used, it should be bypassed to ground with a 0.01 F capacitor. It should also be noted that VBB is only designed to be used as an input bias for the EL32, the VBB output has limited sinking and sourcing capabilities. The reset pin is asynchronous and active on the rising edge. On power up, the internal flip-flops will go into a random state; resetting allows multiple EL32s in a system to be synchronized. The 100 Series includes temperature compensation.

The MC10EL/100EL32 is an integrated divide-by-2. Differential clock inputs and VBB allow differential, single-ended, or AC-coupled interfaces to the device. If the VBB output is used, it should be bypassed to ground with a 0.01 F capacitor. It should also be noted that VBB is only designed to be used as an input bias for the EL32, the VBB output has limited sinking and sourcing capabilities. The reset pin is asynchronous and active on the rising edge. On power up, the internal flip-flops will go into a random state; resetting allows multiple EL32s in a system to be synchronized. The 100 Series includes temperature compensation.

The FXL4TD245 is a configurable 4-bit dual-voltage supply translator for unidirectional and bidirectional voltage translation between two logic levels. The device enables voltage translation between as high as 3.6V and as low as 1.1V. The A port tracks the VCCA level and the B port tracks the VCCB level. Bidirectional voltage translation between multiple voltage levels: 1.2V, 1.5V, 1.8V, 2.5V and 3.3V. The device will remain 3-stated until both VCCs reach active levels, allowing either VCC to power up first. If either VCC is removed, an internal power-down control circuit places the device in 3-state. transmit/receive (T/

Single-channel dual-input NAND gate, Schmitt trigger

The PCA9306 is a dual-bidirectional I2C-bus and SMBus voltage-level translator with enable (EN) input.

CD4066B CMOS Quad Bidirectional Switch

SN74ALVCH16245 16-Bit Bus Transceiver with 3-State Outputs

4-Channel, 2-Input, 1.65V to 3.6V OR Gate 14-SOIC -40 to 85

SN74AHCT00 Quad 2-Input Positive-NAND Gate

Belonging series of logic circuit: 74LS Logic type: AND gate Number of channels: 4 Number of inputs per channel: 2 Power supply voltage: 4.75V~5.25V Four-way 2-input positive AND gate