Logic device/transceiver/encoder

Belonging series of logic circuit: 74HC Schmitt trigger input: No Number of channels: 6 Number of inputs per channel: 6 Power supply voltage: 2V~6V Quiescent current (maximum value): 20uA

SN74AUC1G126 Single Bus Buffer Gate with 3-State Output

The FXLA108 is a configurable dual-voltage supply translator for unidirectional and bidirectional voltage translation between two logic levels. The device enables voltage translation between as high as 3.6V and as low as 1.1V. The A port tracks the VCCA level and the B port tracks the VCCB level. Bidirectional voltage translation between multiple voltage levels: 1.2V, 1.5V, 1.8V, 2.5V and 3.3V. As long as either VCC = 0V, the device will remain tri-stated, allowing either VCC to power up first. If either VCC is removed, an internal power-down control circuit places the device in 3-state. A high level on the /OE input places both the A and B ports in a high impedance state, disabling both. The /OE input is provided by VCCA. The FXLA108 supports bidirectional translation and does not require a direction control pin. Both ports of the device feature automatic orientation sensing. Either port can sense an input signal and pass it on to the other port as an output signal.

Logic Type: Counter, Decimal Direction: Up, Down Number of Elements: 1 Number of Units: 4 Reset Mode: Asynchronous Timing Mode: Synchronous Counting Rate: 5.5MHz Trigger Type: Positive Edge Operating Voltage: 3V~18V CMOS Presettable BCD up/down counter

SN74HC08 Quad 2-Input Positive-AND Gate

SN74AHCT02 Quad 2-Input Positive-NAND Gate

Type: Buffer, Non-Inverting Supply Voltage: 2V~6V Output Type: Tri-State Output Current Low (IOL): 7.8mA Output Current High (IOH): 7.8mA Operating Temperature: -40℃~+85 ℃

4-Channel, 4.5-V to 5.5-V Buffer 14-SOIC -40 to 85 with TTL Compatible CMOS Inputs and 3-State Outputs

SN74LVC1G10 Single 3-Input Positive-NAND Gate