Vishay Siliconix
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
IRFIZ24GPBF
বিস্তারিত দেখুন ডেটাশিট

IRFIZ24GPBF

Product Overview

Category

The IRFIZ24GPBF belongs to the category of power MOSFETs.

Use

It is commonly used in electronic circuits for switching and amplification applications.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge

Package

The IRFIZ24GPBF is typically available in a TO-220AB package.

Essence

This MOSFET is essential for controlling high-power loads in various electronic devices and systems.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Drain-Source Voltage (VDS): 55V
  • Continuous Drain Current (ID): 17A
  • RDS(ON) (Max) @ VGS = 10V: 0.072Ω
  • Gate-Source Voltage (VGS) ±20V
  • Total Power Dissipation (PD): 94W

Detailed Pin Configuration

The IRFIZ24GPBF has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage capability allows for use in various power applications.
  • Low on-resistance minimizes power losses and improves efficiency.
  • Fast switching speed enables rapid control of the load.

Advantages

  • Suitable for high-power applications
  • Low conduction losses
  • Fast switching speed

Disadvantages

  • Sensitivity to static electricity
  • Gate drive requirements may be more complex compared to other devices

Working Principles

The IRFIZ24GPBF operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

  1. Switching Power Supplies: Utilized in DC-DC converters and inverters for efficient power conversion.
  2. Motor Control: Used in motor drive circuits for controlling speed and direction.
  3. Audio Amplifiers: Employed in audio amplification circuits for high-fidelity sound reproduction.

Detailed and Complete Alternative Models

  1. IRFIZ34GPBF: Similar specifications with higher drain-source voltage rating.
  2. IRFIZ44GPBF: Higher current handling capacity with comparable characteristics.

In conclusion, the IRFIZ24GPBF power MOSFET offers high voltage capability, low on-resistance, and fast switching speed, making it suitable for a wide range of power control applications.

[Word Count: 329]

প্রযুক্তিগত সমাধানে IRFIZ24GPBF এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is the IRFIZ24GPBF used for?

    • The IRFIZ24GPBF is a power MOSFET transistor commonly used in electronic circuits to switch and control high-power loads.

  2. What are the key specifications of the IRFIZ24GPBF?

    • The IRFIZ24GPBF has a maximum drain-source voltage of 55V, a continuous drain current of 17A, and a low on-resistance of 0.072 ohms.

  3. Can the IRFIZ24GPBF be used for PWM applications?

    • Yes, the IRFIZ24GPBF is suitable for pulse-width modulation (PWM) applications due to its fast switching characteristics.

  4. Is the IRFIZ24GPBF suitable for use in motor control circuits?

    • Absolutely, the IRFIZ24GPBF is commonly employed in motor control circuits due to its high current handling capability and low on-resistance.

  5. What are the typical applications of the IRFIZ24GPBF in power supplies?

    • The IRFIZ24GPBF is often utilized in power supply designs for its ability to efficiently switch high currents and handle moderate voltages.

  6. Does the IRFIZ24GPBF require a heatsink for thermal management?

    • Depending on the application and power dissipation, a heatsink may be necessary to ensure proper thermal management of the IRFIZ24GPBF.

  7. Can the IRFIZ24GPBF be used in automotive applications?

    • Yes, the IRFIZ24GPBF can be employed in automotive applications such as electronic control units (ECUs), lighting systems, and motor control.

  8. What are the recommended operating conditions for the IRFIZ24GPBF?

    • The IRFIZ24GPBF operates within a temperature range of -55°C to 175°C and should be driven with appropriate gate voltage and current.

  9. Are there any common failure modes associated with the IRFIZ24GPBF?

    • Common failure modes include overcurrent or overvoltage stress leading to thermal runaway, as well as potential damage from electrostatic discharge (ESD).

  10. Where can I find detailed technical information and application notes for the IRFIZ24GPBF?

    • Detailed technical information, including application notes, can be found in the datasheet provided by the manufacturer or on their official website.