1.5SMC10CA-E3/9AT

Product Overview

Category

The 1.5SMC10CA-E3/9AT belongs to the category of TVS (Transient Voltage Suppressor) diodes.

Use

It is used for surge protection in electronic circuits, providing a high level of protection against transient voltage events.

Characteristics

• Fast response time
• Low clamping voltage
• High surge current capability
• RoHS compliant

Package

The 1.5SMC10CA-E3/9AT is available in a DO-214AB (SMC) package.

Essence

This TVS diode is essential for safeguarding sensitive electronic components from voltage spikes and surges.

Packaging/Quantity

The 1.5SMC10CA-E3/9AT is typically packaged in reels or trays, with quantities varying based on manufacturer specifications.

Specifications

• Standoff Voltage: 8.55V
• Breakdown Voltage: 9.5V
• Maximum Clamping Voltage: 15.6V
• Peak Pulse Current: 43.5A
• Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The 1.5SMC10CA-E3/9AT has two pins, anode, and cathode, which are denoted by the markings on the device.

Functional Features

• Provides protection against transient voltage events
• Rapid response to voltage surges
• Low clamping voltage ensures minimal impact on protected circuits

Advantages

• High surge current capability
• RoHS compliant
• Fast response time

Disadvantages

• May require additional circuitry for comprehensive surge protection in complex systems
• Limited to specific voltage ranges

Working Principles

When a transient voltage event occurs, the 1.5SMC10CA-E3/9AT rapidly conducts excess current away from the protected circuit, limiting the voltage across it to a safe level.

Detailed Application Field Plans

The 1.5SMC10CA-E3/9AT is commonly used in: - Power supplies - Telecommunication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

• SMAJ10A: Similar characteristics and package type
• P6SMB10CA: Higher power dissipation capability
• SMBJ10A: Smaller footprint with comparable performance

Note: The alternative models listed above are provided as examples and may vary based on specific application requirements.

---

This content provides a comprehensive overview of the 1.5SMC10CA-E3/9AT, covering its category, use, characteristics, package, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.