Torex Semiconductor Ltd
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
XC6124F626ER-G
বিস্তারিত দেখুন ডেটাশিট

XC6124F626ER-G

Product Overview

Category

XC6124F626ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The XC6124F626ER-G comes in a small SOT-23-5 package.
  • Essence: This voltage regulator is designed to provide stable and regulated output voltage.
  • Packaging/Quantity: It is typically sold in reels or tubes, with a quantity of 3000 units per reel.

Specifications

The specifications of XC6124F626ER-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 1.8V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (at 100mA)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6124F626ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. NC (No Connection)
  5. EN (Enable)

Functional Features

The key functional features of XC6124F626ER-G include:

  • Low dropout voltage: The voltage regulator maintains a stable output voltage even when the input voltage is close to the desired output voltage.
  • Low quiescent current: It consumes minimal current when in standby mode, making it suitable for battery-powered applications.
  • Thermal shutdown protection: The device automatically shuts down if the temperature exceeds the specified limit, preventing damage due to overheating.
  • Short-circuit protection: It safeguards the circuit by limiting the current in case of a short circuit.

Advantages and Disadvantages

Advantages: - Compact package size - Wide input voltage range - Low dropout voltage - Low quiescent current

Disadvantages: - Limited maximum output current - No adjustable output voltage option

Working Principles

The XC6124F626ER-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6124F626ER-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124F626ER-G are: - LM1117-1.8V - MCP1700-1802E/TO - TS2937CZ-1.8

These models offer similar functionality and specifications, providing options for different design requirements.

In conclusion, the XC6124F626ER-G is a voltage regulator that offers stable and regulated output voltage. With its compact size and low power consumption, it is suitable for various applications in the electronics industry.

প্রযুক্তিগত সমাধানে XC6124F626ER-G এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of XC6124F626ER-G in technical solutions:

  1. Question: What is XC6124F626ER-G?
    - Answer: XC6124F626ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124F626ER-G?
    - Answer: The operating voltage range of XC6124F626ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124F626ER-G work?
    - Answer: XC6124F626ER-G works by continuously monitoring the input voltage and comparing it to a preset threshold voltage. When the input voltage falls below the threshold, an internal reset signal is generated.

  4. Question: What is the purpose of using XC6124F626ER-G in technical solutions?
    - Answer: XC6124F626ER-G is commonly used to ensure proper operation and protection of electronic devices by providing a reliable voltage monitoring and reset function.

  5. Question: Can XC6124F626ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124F626ER-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  6. Question: What is the output type of XC6124F626ER-G?
    - Answer: XC6124F626ER-G has an open-drain output, which means it can be easily interfaced with other digital circuits or microcontrollers.

  7. Question: What is the typical accuracy of the voltage detection threshold in XC6124F626ER-G?
    - Answer: The typical accuracy of the voltage detection threshold in XC6124F626ER-G is ±1.5%.

  8. Question: Can XC6124F626ER-G be used for overvoltage protection?
    - Answer: No, XC6124F626ER-G is primarily designed for undervoltage detection and reset functions. It does not provide overvoltage protection.

  9. Question: What is the maximum operating temperature range of XC6124F626ER-G?
    - Answer: The maximum operating temperature range of XC6124F626ER-G is typically between -40°C and +85°C.

  10. Question: Is XC6124F626ER-G available in different package options?
    - Answer: Yes, XC6124F626ER-G is available in various package options, including SOT-23-5 and USP-6B, to suit different application requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.