STMicroelectronics
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
STN2NE10
বিস্তারিত দেখুন ডেটাশিট

STN2NE10

Product Overview

Category

STN2NE10 belongs to the category of power MOSFETs.

Use

It is commonly used in electronic circuits for switching and amplification purposes.

Characteristics

  • High voltage capability
  • Low input capacitance
  • Fast switching speed
  • Low on-resistance

Package

STN2NE10 is typically available in a TO-220 package.

Essence

The essence of STN2NE10 lies in its ability to efficiently control high voltages in electronic circuits.

Packaging/Quantity

It is usually packaged individually and sold in quantities suitable for various project requirements.

Specifications

  • Drain-Source Voltage (VDS): 100V
  • Continuous Drain Current (ID): 2A
  • On-Resistance (RDS(on)): 1.5Ω
  • Power Dissipation (PD): 25W
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

STN2NE10 features a standard pin configuration with three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage capability allows it to be used in applications requiring control over substantial voltages.
  • Low input capacitance enables fast switching, making it suitable for high-frequency applications.
  • Low on-resistance minimizes power loss and heat generation during operation.

Advantages and Disadvantages

Advantages

  • Efficient high-voltage control
  • Fast switching speed
  • Low power dissipation

Disadvantages

  • Limited continuous drain current compared to higher-rated MOSFETs
  • Operating temperature range may not be suitable for extreme environments

Working Principles

STN2NE10 operates based on the principles of field-effect transistors, utilizing the voltage applied to the gate terminal to control the flow of current between the drain and source terminals.

Detailed Application Field Plans

STN2NE10 finds application in various electronic circuits, including: - Switching power supplies - Motor control - Audio amplifiers - LED lighting systems

Detailed and Complete Alternative Models

Some alternative models to STN2NE10 include: - IRF540N - FQP30N06L - IRLZ44N - 2N7000

In conclusion, STN2NE10 is a versatile power MOSFET with high voltage capability, fast switching speed, and low on-resistance, making it suitable for a wide range of electronic applications.

[Word count: 344]

প্রযুক্তিগত সমাধানে STN2NE10 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is STN2NE10?

    • STN2NE10 is a high-voltage N-channel Power MOSFET designed for various technical solutions requiring efficient power management.

  2. What is the maximum voltage rating of STN2NE10?

    • The maximum voltage rating of STN2NE10 is typically around 100V, making it suitable for applications requiring high voltage handling.

  3. What is the typical current rating of STN2NE10?

    • The typical current rating of STN2NE10 is around several amperes, allowing it to handle moderate to high current loads in technical solutions.

  4. What are the common technical solutions where STN2NE10 is used?

    • STN2NE10 is commonly used in applications such as motor control, power supplies, DC-DC converters, and electronic load switches.

  5. What are the key features of STN2NE10 that make it suitable for technical solutions?

    • STN2NE10 offers low on-state resistance, fast switching capabilities, and high input capacitance, making it ideal for efficient power management in various applications.

  6. Does STN2NE10 require any specific heat dissipation measures?

    • Yes, due to its high-voltage and high-current capabilities, STN2NE10 may require appropriate heat sinking or thermal management to ensure optimal performance and reliability.

  7. Can STN2NE10 be used in automotive applications?

    • Yes, STN2NE10 is often utilized in automotive systems such as electric power steering, engine control, and battery management due to its robustness and high-voltage handling.

  8. Are there any recommended driver ICs for driving STN2NE10 in technical solutions?

    • Yes, there are various driver ICs available that are compatible with STN2NE10 and can be used to optimize its performance in different applications.

  9. What are the typical operating temperature ranges for STN2NE10?

    • STN2NE10 is designed to operate within a wide temperature range, typically from -55°C to 175°C, ensuring its suitability for diverse environmental conditions.

  10. Is STN2NE10 RoHS compliant?

    • Yes, STN2NE10 is generally RoHS compliant, meeting the requirements for lead-free and environmentally friendly manufacturing processes.