STMicroelectronics
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
STL17N65M5
বিস্তারিত দেখুন ডেটাশিট

STL17N65M5

Product Overview

Category

The STL17N65M5 belongs to the category of power MOSFETs.

Use

It is commonly used in power supply applications, motor control, and other high-power switching applications.

Characteristics

  • High voltage capability
  • Low input capacitance
  • Fast switching speed
  • Low on-resistance

Package

The STL17N65M5 is typically available in a TO-264 package.

Essence

The essence of the STL17N65M5 lies in its ability to efficiently handle high power and high voltage applications with low losses.

Packaging/Quantity

The STL17N65M5 is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Drain-Source Voltage (VDS): 650V
  • Continuous Drain Current (ID): 17A
  • On-Resistance (RDS(on)): 0.19Ω
  • Input Capacitance (Ciss): 2900pF
  • Power Dissipation (PD): 280W

Detailed Pin Configuration

The pin configuration of the STL17N65M5 typically includes the following pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage capability allows for use in various power applications.
  • Low input capacitance enables fast switching speeds.
  • Low on-resistance minimizes power losses and improves efficiency.

Advantages

  • Suitable for high-power applications
  • Fast switching speed
  • Low power dissipation

Disadvantages

  • Higher cost compared to lower voltage MOSFETs
  • May require additional circuitry for driving the gate at higher voltages

Working Principles

The STL17N65M5 operates based on the principles of field-effect transistors, where the gate voltage controls the flow of current between the drain and source terminals. When a sufficient gate voltage is applied, the MOSFET conducts, allowing power to flow through the device.

Detailed Application Field Plans

The STL17N65M5 is well-suited for use in: - Switch-mode power supplies - Motor control systems - High-voltage DC-DC converters - Inverters for industrial and automotive applications

Detailed and Complete Alternative Models

Some alternative models to the STL17N65M5 include: - STP16NF06L - IRFP460 - FDPF18N50T

In conclusion, the STL17N65M5 is a high-voltage power MOSFET designed for efficient handling of high-power applications with its fast switching speed, low on-resistance, and high voltage capability. While it may have a higher cost and require additional circuitry for certain applications, its advantages in power handling and efficiency make it a preferred choice for various power supply and motor control systems.

Word count: 394

প্রযুক্তিগত সমাধানে STL17N65M5 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is the maximum drain-source voltage rating of the STL17N65M5 MOSFET?

    • The maximum drain-source voltage rating of the STL17N65M5 is 650V.

  2. What is the continuous drain current rating of the STL17N65M5 MOSFET?

    • The continuous drain current rating of the STL17N65M5 is 17A.

  3. What is the on-state resistance (RDS(on)) of the STL17N65M5 MOSFET?

    • The on-state resistance of the STL17N65M5 is typically 0.165 ohms at VGS = 10V.

  4. Can the STL17N65M5 be used in high-frequency switching applications?

    • Yes, the STL17N65M5 is suitable for high-frequency switching due to its low gate charge and input capacitance.

  5. What are the typical applications for the STL17N65M5 MOSFET?

    • Typical applications include power supplies, motor control, lighting, and industrial equipment.

  6. Does the STL17N65M5 require a heat sink for operation?

    • The need for a heat sink depends on the specific application and the power dissipation requirements. In high-power applications, a heat sink may be necessary.

  7. What is the maximum junction temperature of the STL17N65M5?

    • The maximum junction temperature is 150°C.

  8. Is the STL17N65M5 suitable for automotive applications?

    • Yes, the STL17N65M5 is designed for automotive applications and complies with relevant industry standards.

  9. What is the gate-source voltage (VGS) range for proper operation of the STL17N65M5?

    • The gate-source voltage range is typically ±20V.

  10. Are there any recommended driver ICs for controlling the STL17N65M5 MOSFET?

    • Various driver ICs from different manufacturers can be used to drive the STL17N65M5, and the choice depends on the specific application requirements.