STMicroelectronics
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
ST72F262G1B5
বিস্তারিত দেখুন ডেটাশিট

ST72F262G1B5

Product Overview

Category

The ST72F262G1B5 belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for control and processing tasks.

Characteristics

  • High-performance 8-bit microcontroller
  • Low power consumption
  • Enhanced peripheral set
  • Flash memory for program storage
  • On-chip RAM for data storage
  • Multiple communication interfaces (UART, SPI, I2C)
  • Analog-to-digital converter (ADC)
  • Timers and PWM outputs
  • Interrupt capability
  • Operating voltage range: 2.7V to 5.5V

Package

The ST72F262G1B5 is available in a compact and industry-standard package, such as a 32-pin plastic dual inline package (PDIP).

Essence

The essence of the ST72F262G1B5 lies in its ability to provide efficient control and processing capabilities in a wide range of applications.

Packaging/Quantity

This microcontroller is typically sold in reels or tubes, with quantities varying depending on the supplier and customer requirements.

Specifications

  • CPU clock frequency: Up to 16 MHz
  • Program memory size: 32 KB flash
  • Data memory size: 1 KB RAM
  • Number of I/O pins: 28
  • ADC resolution: 10 bits
  • Communication interfaces: UART, SPI, I2C
  • Timers: 3 general-purpose timers, 1 watchdog timer
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The ST72F262G1B5 has a total of 32 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. PA0 - General-purpose I/O pin
  3. PA1 - General-purpose I/O pin
  4. PA2 - General-purpose I/O pin
  5. PA3 - General-purpose I/O pin
  6. PA4 - General-purpose I/O pin
  7. PA5 - General-purpose I/O pin
  8. PA6 - General-purpose I/O pin
  9. PA7 - General-purpose I/O pin
  10. PB0 - General-purpose I/O pin
  11. PB1 - General-purpose I/O pin
  12. PB2 - General-purpose I/O pin
  13. PB3 - General-purpose I/O pin
  14. PB4 - General-purpose I/O pin
  15. PB5 - General-purpose I/O pin
  16. PB6 - General-purpose I/O pin
  17. PB7 - General-purpose I/O pin
  18. PC0 - General-purpose I/O pin
  19. PC1 - General-purpose I/O pin
  20. PC2 - General-purpose I/O pin
  21. PC3 - General-purpose I/O pin
  22. PC4 - General-purpose I/O pin
  23. PC5 - General-purpose I/O pin
  24. PC6 - General-purpose I/O pin
  25. PC7 - General-purpose I/O pin
  26. RESET - Reset pin
  27. XTAL1 - Crystal oscillator input
  28. XTAL2 - Crystal oscillator output
  29. VSS - Ground
  30. VDD - Power supply voltage
  31. OSCIN - Oscillator input
  32. OSCOUT - Oscillator output

Functional Features

The ST72F262G1B5 offers several functional features that enhance its usability and performance in various applications:

  • High-speed processing capabilities
  • Flexible I/O configuration
  • On-chip memory for program and data storage
  • Multiple communication interfaces for seamless integration with other devices
  • Analog-to-digital converter for sensor interfacing
  • Timers and PWM outputs for precise timing control
  • Interrupt capability for efficient event handling

Advantages and Disadvantages

Advantages

  • High-performance microcontroller suitable for demanding applications
  • Low power consumption for energy-efficient designs
  • Enhanced peripheral set for versatile functionality
  • Ample program and data memory for complex tasks
  • Wide operating voltage range for compatibility with different power sources

Disadvantages

  • Limited I/O pins compared to some other microcontrollers in the same category
  • Relatively higher cost compared to lower-end microcontrollers

Working Principles

The ST72F262G1B5 operates based on the principles of a typical microcontroller. It executes instructions stored in its flash memory, processes data using its CPU, and interacts with external devices through its I/O pins and communication interfaces. The microcontroller's working principles involve fetching, decoding, and executing instructions to perform specific tasks as programmed.

Detailed Application Field Plans

The ST72F262G1B5 finds application in various fields, including but not limited to:

  1. Industrial automation: Control systems, motor drives, and monitoring

প্রযুক্তিগত সমাধানে ST72F262G1B5 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of ST72F262G1B5 in technical solutions:

Q1: What is the ST72F262G1B5 microcontroller used for? A1: The ST72F262G1B5 microcontroller is commonly used in various technical solutions, including industrial automation, consumer electronics, automotive applications, and more.

Q2: What is the maximum clock frequency supported by the ST72F262G1B5? A2: The ST72F262G1B5 microcontroller supports a maximum clock frequency of 16 MHz.

Q3: How much flash memory does the ST72F262G1B5 have? A3: The ST72F262G1B5 microcontroller has 8 KB of flash memory for program storage.

Q4: Can I use the ST72F262G1B5 for real-time applications? A4: Yes, the ST72F262G1B5 microcontroller is suitable for real-time applications due to its fast execution speed and interrupt handling capabilities.

Q5: What peripherals are available on the ST72F262G1B5? A5: The ST72F262G1B5 microcontroller features several peripherals, including UART, SPI, I2C, timers, ADC, and GPIO pins.

Q6: Does the ST72F262G1B5 support in-circuit programming? A6: Yes, the ST72F262G1B5 microcontroller supports in-circuit programming, allowing for easy firmware updates and debugging.

Q7: Can I interface external memory with the ST72F262G1B5? A7: No, the ST72F262G1B5 does not have built-in support for external memory interfaces. It only has internal flash and RAM.

Q8: What is the operating voltage range of the ST72F262G1B5? A8: The ST72F262G1B5 microcontroller operates within a voltage range of 2.7V to 5.5V.

Q9: Is the ST72F262G1B5 suitable for low-power applications? A9: Yes, the ST72F262G1B5 microcontroller has various power-saving features, making it suitable for low-power applications.

Q10: Can I use the ST72F262G1B5 in harsh environments? A10: The ST72F262G1B5 microcontroller has a wide temperature range and can withstand harsh environments, making it suitable for industrial applications.

Please note that these answers are general and may vary depending on specific application requirements and implementation details.