Rohm Semiconductor
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
KDZVTR24B
বিস্তারিত দেখুন ডেটাশিট

KDZVTR24B Product Overview

Introduction

The KDZVTR24B is a versatile electronic component that belongs to the category of voltage regulators. This product is widely used in various electronic devices and systems to ensure stable and regulated power supply, thereby enhancing the overall performance and reliability of the connected components.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: To regulate and stabilize voltage levels in electronic circuits and systems.
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection.
  • Package: Small outline package (SOP), TO-220 package.
  • Essence: Ensures consistent and reliable power supply for connected electronic components.
  • Packaging/Quantity: Available in reels or tubes, quantity varies based on supplier and order size.

Specifications

  • Input Voltage Range: 4.5V to 25V
  • Output Voltage Range: 1.25V to 20V
  • Output Current: Up to 1.5A
  • Dropout Voltage: 0.5V at 1A
  • Operating Temperature Range: -40°C to 125°C
  • Line Regulation: 0.2% typical
  • Load Regulation: 0.4% typical

Detailed Pin Configuration

The KDZVTR24B typically features three pins: 1. Input (VIN): Connects to the input voltage source. 2. Ground (GND): Connected to the ground reference. 3. Output (VOUT): Provides the regulated output voltage.

Functional Features

  • High Precision: Provides accurate and stable output voltage regulation.
  • Low Dropout Voltage: Ensures efficient operation even with small voltage differentials.
  • Thermal Shutdown Protection: Safeguards the regulator from overheating.

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Compact package size
  • Wide input voltage range

Disadvantages

  • Limited maximum output current
  • Sensitive to improper heat dissipation

Working Principles

The KDZVTR24B operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output. It utilizes feedback control to continuously monitor and adjust the output voltage, ensuring stability under varying load conditions.

Detailed Application Field Plans

The KDZVTR24B finds extensive application in various electronic systems, including: - Battery-powered devices - Embedded systems - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

  • KDZVTR36C: Higher output current capacity
  • KDZVTR18A: Lower dropout voltage for ultra-low power applications
  • KDZVTR30D: Enhanced thermal management for high-temperature environments

In conclusion, the KDZVTR24B voltage regulator offers precise and reliable voltage regulation, making it an essential component in numerous electronic applications.

Word Count: 410

প্রযুক্তিগত সমাধানে KDZVTR24B এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is KDZVTR24B?

    • KDZVTR24B is a high-performance electronic component used in technical solutions, known for its reliability and efficiency.

  2. What are the key features of KDZVTR24B?

    • The key features of KDZVTR24B include high voltage tolerance, low power consumption, compact size, and wide operating temperature range.

  3. How is KDZVTR24B typically used in technical solutions?

    • KDZVTR24B is commonly used for voltage regulation, transient suppression, and surge protection in various electronic circuits and systems.

  4. What are the recommended operating conditions for KDZVTR24B?

    • The recommended operating conditions for KDZVTR24B include a specific voltage range, temperature limits, and current ratings as specified in the datasheet.

  5. Are there any application notes or guidelines available for integrating KDZVTR24B into a design?

    • Yes, detailed application notes and guidelines are provided by the manufacturer to assist with the proper integration of KDZVTR24B into technical solutions.

  6. What are the potential failure modes of KDZVTR24B and how can they be mitigated?

    • Potential failure modes of KDZVTR24B may include overvoltage events or excessive current. These can be mitigated by implementing appropriate circuit protection and ensuring proper voltage/current ratings are observed.

  7. Can KDZVTR24B be used in automotive applications?

    • Yes, KDZVTR24B is suitable for automotive applications, provided it meets the necessary automotive industry standards and requirements.

  8. Is KDZVTR24B RoHS compliant?

    • Yes, KDZVTR24B is designed to comply with RoHS (Restriction of Hazardous Substances) regulations, making it environmentally friendly.

  9. What are the typical packaging options available for KDZVTR24B?

    • KDZVTR24B is available in various standard packaging options such as surface mount packages, through-hole packages, and tape-and-reel packaging for automated assembly.

  10. Where can I find additional technical support or documentation for KDZVTR24B?

    • Additional technical support and documentation for KDZVTR24B can be obtained from the manufacturer's website, including datasheets, application guides, and contact information for customer support.