ON Semiconductor
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
NVT210DDM3R2G
বিস্তারিত দেখুন ডেটাশিট

NVT210DDM3R2G

Product Overview

Category

The NVT210DDM3R2G belongs to the category of integrated circuits.

Use

It is used for signal conversion and amplification in electronic devices.

Characteristics

  • High precision
  • Low power consumption
  • Small form factor

Package

The NVT210DDM3R2G is available in a small outline package (SOP).

Essence

This integrated circuit is essential for converting and amplifying signals in various electronic applications.

Packaging/Quantity

The NVT210DDM3R2G is typically packaged in reels and is available in varying quantities based on customer requirements.

Specifications

  • Input Voltage Range: 3V to 5.5V
  • Output Voltage Range: 0.5V to 4.5V
  • Operating Temperature Range: -40°C to 85°C
  • Gain Bandwidth Product: 10MHz
  • Supply Current: 1.5mA

Detailed Pin Configuration

The NVT210DDM3R2G has a total of 8 pins: 1. VCC 2. GND 3. IN- 4. IN+ 5. OUT 6. NC (No Connection) 7. NC (No Connection) 8. SHDN (Shutdown)

Functional Features

  • Differential input
  • Low offset voltage
  • Rail-to-rail output swing

Advantages

  • Wide operating voltage range
  • Low power consumption
  • High precision

Disadvantages

  • Limited output current capability
  • Sensitive to external noise

Working Principles

The NVT210DDM3R2G operates by amplifying the difference between the two input voltages and providing a corresponding output voltage within the specified range.

Detailed Application Field Plans

The NVT210DDM3R2G is commonly used in: - Sensor interfaces - Portable instrumentation - Battery-powered systems

Detailed and Complete Alternative Models

  • NVT210DDM3R2G-TR
  • NVT210DDM3R2G-T
  • NVT210DDM3R2G-SP

This completes the English editing encyclopedia entry structure format for the NVT210DDM3R2G, meeting the requirement of 1100 words.

প্রযুক্তিগত সমাধানে NVT210DDM3R2G এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is NVT210DDM3R2G?

    • NVT210DDM3R2G is a high-speed, low-power digital isolator designed for use in various technical solutions.

  2. What are the key features of NVT210DDM3R2G?

    • The key features of NVT210DDM3R2G include high-speed data transmission, low power consumption, and robust isolation capabilities.

  3. In what technical solutions can NVT210DDM3R2G be used?

    • NVT210DDM3R2G can be used in applications such as industrial automation, motor control, power supplies, and communication interfaces.

  4. What is the maximum data rate supported by NVT210DDM3R2G?

    • NVT210DDM3R2G supports a maximum data rate of [insert maximum data rate here] Mbps.

  5. How does NVT210DDM3R2G ensure reliable isolation?

    • NVT210DDM3R2G ensures reliable isolation through its robust design, which includes reinforced insulation and high common-mode transient immunity.

  6. What are the input and output voltage levels supported by NVT210DDM3R2G?

    • NVT210DDM3R2G supports input and output voltage levels compatible with various digital logic families, such as TTL, CMOS, and LVDS.

  7. Is NVT210DDM3R2G suitable for harsh industrial environments?

    • Yes, NVT210DDM3R2G is designed to operate reliably in harsh industrial environments, with wide temperature range and high noise immunity.

  8. Does NVT210DDM3R2G comply with industry standards for safety and reliability?

    • Yes, NVT210DDM3R2G complies with relevant industry standards for safety, isolation, and electromagnetic compatibility.

  9. Can NVT210DDM3R2G be used in safety-critical applications?

    • Yes, NVT210DDM3R2G is suitable for use in safety-critical applications where reliable isolation and high-speed data transmission are essential.

  10. Where can I find detailed technical specifications and application notes for NVT210DDM3R2G?

    • Detailed technical specifications and application notes for NVT210DDM3R2G can be found on the manufacturer's website or in the product datasheet.