ON Semiconductor
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
NCV8800HDW33R2
বিস্তারিত দেখুন ডেটাশিট

NCV8800HDW33R2

Product Overview

Category

The NCV8800HDW33R2 belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent and thermal protection
  • Adjustable output voltage

Package

The NCV8800HDW33R2 comes in a compact and durable package, designed to withstand various environmental conditions.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices, ensuring their proper functioning.

Packaging/Quantity

The NCV8800HDW33R2 is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 3.3V
  • Dropout Voltage: 200mV (typical)
  • Output Current: 1A
  • Quiescent Current: 120µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The NCV8800HDW33R2 has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • High Efficiency: The NCV8800HDW33R2 offers high efficiency, minimizing power loss during voltage regulation.
  • Overcurrent and Thermal Protection: This product incorporates overcurrent and thermal protection mechanisms, safeguarding against potential damage.
  • Adjustable Output Voltage: The output voltage can be adjusted according to specific requirements, providing flexibility in various applications.

Advantages and Disadvantages

Advantages

  • High efficiency ensures optimal power utilization.
  • Wide input voltage range allows compatibility with different power sources.
  • Overcurrent and thermal protection enhance reliability and safety.
  • Adjustable output voltage provides versatility.

Disadvantages

  • Limited output current capacity may restrict usage in high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

The NCV8800HDW33R2 operates on the principle of linear voltage regulation. It utilizes a feedback mechanism to maintain a constant output voltage, compensating for changes in input voltage and load conditions. By comparing the actual output voltage with a reference voltage, the regulator adjusts its internal circuitry to ensure a stable and regulated output.

Detailed Application Field Plans

The NCV8800HDW33R2 finds extensive application in various electronic systems, including but not limited to: - Power supplies - Battery-powered devices - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  1. NCV8800HDW50R2: Similar to NCV8800HDW33R2, but with an output voltage of 5V.
  2. NCV8800HDW12R2: Similar to NCV8800HDW33R2, but with an output voltage of 12V.
  3. NCV8800HDW15R2: Similar to NCV8800HDW33R2, but with an output voltage of 15V.

These alternative models provide options for different output voltage requirements while maintaining similar characteristics and features.

Note: The content provided above is a sample entry and does not reflect the actual specifications or details of any specific product.

প্রযুক্তিগত সমাধানে NCV8800HDW33R2 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of NCV8800HDW33R2 in technical solutions:

  1. Q: What is NCV8800HDW33R2? A: NCV8800HDW33R2 is a voltage regulator IC (integrated circuit) designed for automotive applications.

  2. Q: What is the input voltage range of NCV8800HDW33R2? A: The input voltage range of NCV8800HDW33R2 is typically between 4.5V and 40V.

  3. Q: What is the output voltage of NCV8800HDW33R2? A: NCV8800HDW33R2 provides a fixed output voltage of 3.3V.

  4. Q: Can NCV8800HDW33R2 handle high current loads? A: Yes, NCV8800HDW33R2 can handle a maximum continuous output current of 500mA.

  5. Q: Is NCV8800HDW33R2 suitable for automotive applications? A: Yes, NCV8800HDW33R2 is specifically designed for automotive applications and meets the required standards.

  6. Q: Does NCV8800HDW33R2 have built-in protection features? A: Yes, NCV8800HDW33R2 includes various protection features like overcurrent protection, thermal shutdown, and reverse battery protection.

  7. Q: Can NCV8800HDW33R2 operate in harsh environments? A: Yes, NCV8800HDW33R2 is designed to operate reliably in harsh automotive environments, including wide temperature ranges and high vibration conditions.

  8. Q: What is the typical efficiency of NCV8800HDW33R2? A: NCV8800HDW33R2 has a typical efficiency of around 90%, making it highly efficient in power conversion.

  9. Q: Can NCV8800HDW33R2 be used in other applications apart from automotive? A: While NCV8800HDW33R2 is primarily designed for automotive applications, it can also be used in other industrial and consumer electronics applications that require a regulated 3.3V output.

  10. Q: Are there any application notes or reference designs available for NCV8800HDW33R2? A: Yes, the manufacturer provides application notes and reference designs to help users implement NCV8800HDW33R2 effectively in their technical solutions.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for detailed information.