ON Semiconductor
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
FAN5361UMP182X
বিস্তারিত দেখুন ডেটাশিট

FAN5361UMP182X

Product Overview

Category

FAN5361UMP182X belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low power consumption
  • Compact size
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

FAN5361UMP182X comes in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of FAN5361UMP182X lies in its ability to efficiently regulate voltage while consuming minimal power.

Packaging/Quantity

This product is typically packaged in reels or tubes and is available in various quantities depending on customer requirements.

Specifications

  • Input Voltage Range: 2.7V - 5.5V
  • Output Voltage Range: 0.6V - 3.3V
  • Maximum Output Current: 1.8A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range allows compatibility with various power sources.
  • Adjustable output voltage enables customization for different applications.
  • Overcurrent protection safeguards against excessive current flow.
  • Thermal shutdown protection prevents damage due to overheating.

Advantages

  • High efficiency results in reduced power consumption and longer battery life.
  • Compact size makes it suitable for space-constrained designs.
  • Wide input voltage range provides flexibility in power source selection.
  • Overcurrent and thermal shutdown protection enhance reliability and safety.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

FAN5361UMP182X operates by regulating the input voltage to a desired output voltage level using internal control circuitry. It adjusts the duty cycle of an internal switch to maintain the desired output voltage despite variations in the input voltage.

Detailed Application Field Plans

  • Portable electronic devices
  • Battery-powered systems
  • IoT devices
  • Wearable technology
  • Consumer electronics

Detailed and Complete Alternative Models

  1. FAN5360UMP182X: Similar specifications, but with a lower maximum output current of 1A.
  2. FAN5362UMP182X: Similar specifications, but with a higher maximum output current of 2A.
  3. FAN5363UMP182X: Similar specifications, but with additional features such as adjustable frequency.

(Note: These alternative models are provided for reference and may have slight differences in specifications and features.)

In conclusion, FAN5361UMP182X is a voltage regulator that offers high efficiency, low power consumption, and a compact size. Its wide input voltage range and adjustable output voltage make it suitable for various applications. While it has limitations in terms of maximum output current and operating temperature range, it provides reliable voltage regulation and protection features.

প্রযুক্তিগত সমাধানে FAN5361UMP182X এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of FAN5361UMP182X in technical solutions:

Q1: What is FAN5361UMP182X? A1: FAN5361UMP182X is a specific model of power management integrated circuit (PMIC) designed for use in various technical solutions.

Q2: What are the key features of FAN5361UMP182X? A2: Some key features of FAN5361UMP182X include multiple voltage regulators, power sequencing capabilities, fault protection mechanisms, and low power consumption.

Q3: What technical solutions can FAN5361UMP182X be used in? A3: FAN5361UMP182X can be used in a wide range of applications such as smartphones, tablets, portable devices, IoT devices, and other battery-powered systems.

Q4: How many voltage regulators does FAN5361UMP182X have? A4: FAN5361UMP182X has multiple voltage regulators, typically including a buck converter, boost converter, and LDOs (low-dropout regulators).

Q5: Can FAN5361UMP182X handle different input voltages? A5: Yes, FAN5361UMP182X is designed to handle a wide range of input voltages, typically from 2.7V to 5.5V.

Q6: Does FAN5361UMP182X support power sequencing? A6: Yes, FAN5361UMP182X supports power sequencing, allowing for controlled startup and shutdown of different power domains in a system.

Q7: What kind of fault protection mechanisms does FAN5361UMP182X have? A7: FAN5361UMP182X incorporates various fault protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown.

Q8: Is FAN5361UMP182X suitable for low-power applications? A8: Yes, FAN5361UMP182X is designed to be highly efficient and has low power consumption, making it suitable for low-power applications.

Q9: Can FAN5361UMP182X be used in battery-powered devices? A9: Absolutely! FAN5361UMP182X is commonly used in battery-powered devices due to its efficient power management capabilities.

Q10: Are there any application notes or reference designs available for FAN5361UMP182X? A10: Yes, the manufacturer of FAN5361UMP182X typically provides application notes, datasheets, and reference designs that can help engineers integrate the PMIC into their technical solutions effectively.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and the intended use case.