NXP USA Inc.
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
MPXH6250A6T1
বিস্তারিত দেখুন ডেটাশিট

MPXH6250A6T1

Introduction

The MPXH6250A6T1 is a pressure sensor belonging to the category of integrated silicon pressure sensors. This device is commonly used for measuring absolute, gauge, or differential pressures in various applications. The MPXH6250A6T1 exhibits distinctive characteristics and comes in a specific package with unique features.

Basic Information Overview

  • Category: Integrated Silicon Pressure Sensor
  • Use: Measurement of absolute, gauge, or differential pressures
  • Characteristics: High accuracy, small form factor, low power consumption
  • Package: Surface mount
  • Essence: Accurate pressure measurement
  • Packaging/Quantity: Tape and reel packaging, quantity varies based on supplier

Specifications

  • Pressure Range: 0 to 250 kPa (0 to 36.3 psi)
  • Supply Voltage: 4.75 to 5.25 V
  • Output Type: Analog
  • Operating Temperature: -40°C to 125°C
  • Accuracy: ±1.5% Full Scale Span (typical)

Detailed Pin Configuration

The MPXH6250A6T1 features a total of six pins: 1. Vout 2. Vss 3. N/C (No Connection) 4. N/C (No Connection) 5. Vsupply 6. N/C (No Connection)

Functional Features

  • High sensitivity to small pressure changes
  • Low power consumption
  • Robust design for harsh environments
  • Built-in temperature compensation

Advantages and Disadvantages

Advantages

  • High accuracy
  • Small form factor
  • Wide operating temperature range

Disadvantages

  • Limited pressure range
  • Analog output requires external ADC for digital interfacing

Working Principles

The MPXH6250A6T1 operates on the principle of piezoresistive sensing. When pressure is applied, the internal resistors change their values, resulting in a corresponding change in output voltage. This voltage is proportional to the applied pressure and can be calibrated to provide an accurate pressure reading.

Detailed Application Field Plans

The MPXH6250A6T1 finds extensive use in various applications, including: - Medical devices - HVAC systems - Industrial automation - Automotive systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the MPXH6250A6T1 include: - MPX5700AP - MPXV5010DP - MPXHZ6250AC6T1

In conclusion, the MPXH6250A6T1 is a versatile pressure sensor with high accuracy and reliability, suitable for a wide range of applications.

Word Count: 410

প্রযুক্তিগত সমাধানে MPXH6250A6T1 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is the MPXH6250A6T1 pressure sensor used for?

    • The MPXH6250A6T1 pressure sensor is commonly used to measure and monitor air or liquid pressure in various technical applications.

  2. What is the operating voltage range of the MPXH6250A6T1?

    • The operating voltage range of the MPXH6250A6T1 is typically 4.75V to 5.25V.

  3. How does the MPXH6250A6T1 communicate with microcontrollers or data acquisition systems?

    • The MPXH6250A6T1 usually communicates using analog voltage output, making it compatible with most microcontrollers and data acquisition systems.

  4. What is the pressure range that the MPXH6250A6T1 can measure?

    • The MPXH6250A6T1 can measure pressure within a range of 0 to 250 kPa (0 to 36.3 psi).

  5. Is the MPXH6250A6T1 suitable for measuring both positive and negative pressure?

    • Yes, the MPXH6250A6T1 is designed to measure both positive and negative pressure differentials.

  6. What are the typical applications of the MPXH6250A6T1 in technical solutions?

    • The MPXH6250A6T1 is commonly used in applications such as HVAC systems, pneumatic controls, medical devices, and industrial automation.

  7. Does the MPXH6250A6T1 require calibration before use?

    • Yes, the MPXH6250A6T1 may require initial calibration to ensure accurate pressure measurements.

  8. Can the MPXH6250A6T1 withstand harsh environmental conditions?

    • The MPXH6250A6T1 is designed to operate in relatively harsh environments, but it's important to consider the specific environmental conditions and consult the datasheet for detailed information.

  9. What is the accuracy of the MPXH6250A6T1 pressure sensor?

    • The MPXH6250A6T1 typically has an accuracy of around ±1.5% full-scale span over the specified temperature range.

  10. Are there any special considerations for PCB layout when integrating the MPXH6250A6T1 into a design?

    • It's recommended to follow the guidelines provided in the datasheet for PCB layout to minimize noise and ensure proper performance of the MPXH6250A6T1.