NXP USA Inc.
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
MPX2200DP
বিস্তারিত দেখুন ডেটাশিট

MPX2200DP

Introduction

The MPX2200DP is a pressure sensor belonging to the category of integrated pressure sensors. It is commonly used for measuring and monitoring pressure in various applications. This entry provides an overview of the MPX2200DP, including its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Integrated Pressure Sensor
  • Use: Measurement and Monitoring of Pressure
  • Characteristics: High Accuracy, Small Size, Low Power Consumption
  • Package: Dual Inline Package (DIP)
  • Essence: Transduces Pressure into an Analog Output Voltage
  • Packaging/Quantity: Typically Sold Individually

Specifications

  • Pressure Range: 0 to 200 kPa
  • Supply Voltage: 4.75 to 5.25 V
  • Output Type: Analog Voltage
  • Operating Temperature Range: -40°C to 125°C
  • Accuracy: ±1.5% Full Scale Span (Typical)

Detailed Pin Configuration

The MPX2200DP has a dual inline package with a total of 6 pins. The pinout configuration is as follows: 1. Vout (Analog Output) 2. Vss (Ground) 3. V+ (Supply Voltage) 4. NC (No Connection) 5. NC (No Connection) 6. Pout (Pressure Port)

Functional Features

  • Transduces Pressure into Analog Output Voltage
  • Ratiometric to Supply Voltage
  • Provides Accurate and Reliable Pressure Measurements

Advantages and Disadvantages

Advantages

  • High Accuracy
  • Small Size
  • Low Power Consumption
  • Ratiometric Output
  • Wide Operating Temperature Range

Disadvantages

  • Limited Pressure Range (0 to 200 kPa)
  • Requires External Signal Conditioning Circuitry

Working Principles

The MPX2200DP utilizes piezoresistive technology to transduce pressure into an analog output voltage. When pressure is applied to the pressure port, the internal resistive elements change their resistance, resulting in a corresponding change in the output voltage. This output voltage is ratiometric to the supply voltage, providing an accurate representation of the applied pressure.

Detailed Application Field Plans

The MPX2200DP is widely used in various applications, including: - Automotive: Tire Pressure Monitoring Systems - Industrial: Process Control and Monitoring - Medical: Patient Monitoring Equipment - Consumer Electronics: Barometric Pressure Sensing

Detailed and Complete Alternative Models

Some alternative models to the MPX2200DP include: - MPX2050DP: Similar performance with a different pressure range - MPX5700AP: Higher pressure range with similar characteristics - MPXV5010G: Digital output alternative with integrated A/D converter

In conclusion, the MPX2200DP is a versatile pressure sensor with high accuracy and reliability, making it suitable for a wide range of applications. Its compact size and low power consumption further enhance its appeal in various industries.

Word Count: 411

প্রযুক্তিগত সমাধানে MPX2200DP এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure, here are 10 common questions and answers related to the application of MPX2200DP in technical solutions:

  1. What is the MPX2200DP pressure sensor used for?

    • The MPX2200DP is a dual-port, integrated pressure sensor designed for use in various applications such as automotive, industrial, and medical devices.

  2. What is the operating voltage range of the MPX2200DP?

    • The operating voltage range of the MPX2200DP is typically 4.75V to 5.25V.

  3. How does the MPX2200DP communicate with microcontrollers or other devices?

    • The MPX2200DP communicates using an analog output signal, typically a ratiometric output that varies with the applied pressure.

  4. What is the pressure range that the MPX2200DP can measure?

    • The MPX2200DP can measure pressure within a range of 0 to 200 kPa (0 to 29 psi).

  5. Can the MPX2200DP be used in harsh environments?

    • Yes, the MPX2200DP is designed to operate in harsh environments and can withstand certain levels of shock and vibration.

  6. What is the accuracy of the MPX2200DP?

    • The accuracy of the MPX2200DP is typically within ±2.5% of the full-scale output over the specified temperature range.

  7. Is the MPX2200DP suitable for measuring both positive and negative pressure?

    • Yes, the MPX2200DP is capable of measuring both positive and negative pressure differentials.

  8. Can the MPX2200DP be used for liquid pressure measurement?

    • The MPX2200DP is primarily designed for air and non-corrosive gas pressure measurements and may not be suitable for liquid pressure measurement.

  9. What are some typical applications of the MPX2200DP?

    • Typical applications include automotive manifold pressure measurement, pneumatic control systems, and industrial process control.

  10. Does the MPX2200DP require external calibration?

    • The MPX2200DP is factory calibrated and typically does not require external calibration, but it may benefit from zero and span adjustments in some applications.