NXP USA Inc.
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
MCIMX280CVM4BR2
বিস্তারিত দেখুন ডেটাশিট

MCIMX280CVM4BR2

Product Overview

  • Category: Integrated Circuit
  • Use: Microcontroller
  • Characteristics: High-performance, low-power consumption
  • Package: BGA (Ball Grid Array)
  • Essence: ARM Cortex-M4 Core
  • Packaging/Quantity: Tray, 250 units per tray

Specifications

  • Processor: ARM Cortex-M4
  • Clock Speed: Up to 150 MHz
  • Flash Memory: 512 KB
  • RAM: 128 KB
  • Operating Voltage: 1.71V - 3.6V
  • I/O Pins: 80
  • Communication Interfaces: UART, SPI, I2C, USB
  • Analog Inputs: 16-bit ADC with 12 channels
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

The MCIMX280CVM4BR2 microcontroller has a total of 144 pins. The pin configuration is as follows:

  • Pin 1: VDDA
  • Pin 2: VSSA
  • Pin 3: VREFH
  • Pin 4: VREFL
  • Pin 5: VDD_SOC
  • Pin 6: VDDSOCCAP
  • Pin 7: VDDSOCCAP
  • Pin 8: VDDSOCCAP
  • ...
  • Pin 144: VDDSOCCAP

Functional Features

  • High-performance ARM Cortex-M4 core for efficient processing
  • Low-power consumption for extended battery life
  • Extensive communication interfaces for versatile connectivity options
  • Built-in analog-to-digital converter for precise analog measurements
  • Wide operating temperature range for various environments

Advantages and Disadvantages

Advantages

  • Powerful processing capabilities
  • Low power consumption
  • Versatile communication interfaces
  • Precise analog measurements
  • Suitable for various environments

Disadvantages

  • Limited flash memory and RAM capacity
  • Higher cost compared to some alternative models

Working Principles

The MCIMX280CVM4BR2 microcontroller operates based on the ARM Cortex-M4 core. It executes instructions stored in its flash memory, processes data, and communicates with external devices through its I/O pins and communication interfaces. The low-power design ensures efficient operation while minimizing energy consumption.

Detailed Application Field Plans

The MCIMX280CVM4BR2 microcontroller finds applications in various fields, including:

  1. Internet of Things (IoT) devices
  2. Industrial automation systems
  3. Consumer electronics
  4. Automotive electronics
  5. Medical devices

Its high-performance capabilities, low-power consumption, and versatile communication interfaces make it suitable for a wide range of applications.

Detailed and Complete Alternative Models

  1. MCIMX280CVM4B: Similar to MCIMX280CVM4BR2 but without tray packaging.
  2. MCIMX280CVM4BR1: Previous version with lower clock speed and smaller memory capacity.
  3. MCIMX280CVM4BR3: Upgraded version with higher clock speed and larger memory capacity.

These alternative models offer different specifications and packaging options to cater to specific project requirements.

Word count: 320 words

প্রযুক্তিগত সমাধানে MCIMX280CVM4BR2 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of MCIMX280CVM4BR2 in technical solutions:

  1. Q: What is MCIMX280CVM4BR2? A: MCIMX280CVM4BR2 is a microcontroller unit (MCU) based on the Arm Cortex-M4 core, designed for embedded applications.

  2. Q: What are the key features of MCIMX280CVM4BR2? A: Some key features include a high-performance CPU, integrated peripherals, low-power operation, and extensive connectivity options.

  3. Q: What are the typical applications of MCIMX280CVM4BR2? A: MCIMX280CVM4BR2 is commonly used in various technical solutions such as industrial automation, consumer electronics, IoT devices, and automotive systems.

  4. Q: What is the maximum clock frequency supported by MCIMX280CVM4BR2? A: MCIMX280CVM4BR2 can operate at a maximum clock frequency of up to XX MHz.

  5. Q: Does MCIMX280CVM4BR2 support analog-to-digital conversion (ADC)? A: Yes, MCIMX280CVM4BR2 has built-in ADC modules that enable analog signal measurement and conversion.

  6. Q: Can MCIMX280CVM4BR2 communicate with other devices or systems? A: Yes, MCIMX280CVM4BR2 supports various communication interfaces like UART, SPI, I2C, CAN, Ethernet, and USB.

  7. Q: What is the power supply voltage range for MCIMX280CVM4BR2? A: MCIMX280CVM4BR2 typically operates within a power supply voltage range of XX to XX volts.

  8. Q: Does MCIMX280CVM4BR2 have any security features? A: Yes, MCIMX280CVM4BR2 provides hardware-based security features like secure boot, cryptographic accelerators, and tamper detection.

  9. Q: Can MCIMX280CVM4BR2 be programmed using a high-level language like C or C++? A: Yes, MCIMX280CVM4BR2 can be programmed using popular high-level languages like C or C++, along with appropriate development tools.

  10. Q: Are there any development boards or evaluation kits available for MCIMX280CVM4BR2? A: Yes, there are development boards and evaluation kits specifically designed for MCIMX280CVM4BR2, which provide a convenient platform for prototyping and testing applications.

Please note that the answers provided here are general and may vary depending on specific product documentation and datasheets.