Microsemi Corporation
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
UES806HR2
বিস্তারিত দেখুন ডেটাশিট

UES806HR2

Product Overview

Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: 1 piece per package

Specifications

  • Input Voltage: 4.5V to 24V
  • Output Voltage: 3.3V
  • Maximum Output Current: 1.5A
  • Dropout Voltage: 0.6V at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. Vout (Output Voltage)
  3. GND (Ground)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Fast transient response

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Compact TO-220 package

Disadvantages: - Limited maximum output current - Higher dropout voltage compared to some alternatives

Working Principles

UES806HR2 is a linear voltage regulator that maintains a constant output voltage despite variations in the input voltage or load current. It achieves this by dissipating excess power as heat to regulate the output voltage.

Detailed Application Field Plans

  1. Battery-powered devices
  2. Automotive electronics
  3. Industrial control systems
  4. Consumer electronics

Detailed and Complete Alternative Models

  1. LM1117
  2. L7805
  3. LM317
  4. LT1083

This comprehensive entry provides an in-depth understanding of UES806HR2, covering its specifications, features, advantages, and application fields, while also offering alternative models for comparison.

প্রযুক্তিগত সমাধানে UES806HR2 এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is UES806HR2?

    • UES806HR2 is a high-performance, multi-purpose adhesive designed for use in various technical solutions.

  2. What materials can UES806HR2 bond?

    • UES806HR2 can bond a wide range of materials including metals, plastics, composites, and ceramics.

  3. What is the recommended application temperature for UES806HR2?

    • The recommended application temperature for UES806HR2 is between 65°F and 100°F (18°C and 38°C).

  4. How long does it take for UES806HR2 to cure?

    • UES806HR2 typically cures within 24 hours at room temperature, but curing time can be accelerated with heat.

  5. Is UES806HR2 resistant to environmental factors?

    • Yes, UES806HR2 exhibits excellent resistance to moisture, chemicals, and temperature extremes once fully cured.

  6. Can UES806HR2 be used for structural bonding?

    • Yes, UES806HR2 is suitable for structural bonding applications when used according to the manufacturer's guidelines.

  7. Does UES806HR2 require surface preparation before application?

    • Yes, proper surface preparation, including cleaning and roughening, is essential for achieving optimal bond strength with UES806HR2.

  8. What is the shelf life of UES806HR2?

    • When stored in its original unopened container at recommended temperatures, UES806HR2 has a shelf life of approximately 12 months.

  9. Can UES806HR2 be used in high-temperature environments?

    • Yes, UES806HR2 is capable of withstanding continuous exposure to elevated temperatures up to 250°F (121°C) once fully cured.

  10. Is UES806HR2 suitable for use in aerospace applications?

    • Yes, UES806HR2 meets the stringent requirements for aerospace applications and has been successfully used in such environments.