Microchip Technology
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
PIC32MX250F128D-I/TL
বিস্তারিত দেখুন ডেটাশিট

PIC32MX250F128D-I/TL

Introduction

The PIC32MX250F128D-I/TL belongs to the category of microcontrollers and is widely used in various electronic devices. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded control applications, IoT devices, consumer electronics
  • Characteristics: High performance, low power consumption, integrated peripherals
  • Package: 28-pin TQFP
  • Essence: Advanced microcontroller with enhanced features
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Processor: 32-bit MIPS M4K Core
  • Flash Memory: 128 KB
  • RAM: 32 KB
  • Operating Voltage: 2.3V - 3.6V
  • Maximum Speed: 50 MHz
  • I/O Pins: 23
  • Communication Interfaces: SPI, I2C, UART, USB
  • Analog-to-Digital Converter (ADC): 10-bit, 15 channels
  • Timers: 5 x 16-bit, 1 x 32-bit
  • Comparators: 2

Detailed Pin Configuration

The PIC32MX250F128D-I/TL features a 28-pin TQFP package with specific pin assignments for power, ground, I/O, communication interfaces, and other functionalities. A detailed pinout diagram can be found in the datasheet provided by the manufacturer.

Functional Features

  • High Performance: The 32-bit MIPS M4K core provides efficient processing capabilities.
  • Low Power Consumption: Suitable for battery-powered and energy-efficient applications.
  • Integrated Peripherals: Built-in ADC, timers, and communication interfaces simplify system design.

Advantages and Disadvantages

Advantages

  • High processing power for demanding applications
  • Low power consumption extends battery life
  • Integrated peripherals reduce external component count

Disadvantages

  • Limited availability of alternative packages
  • Relatively higher cost compared to some competing microcontrollers

Working Principles

The PIC32MX250F128D-I/TL operates based on the MIPS M4K core architecture, utilizing its processing capabilities to execute program instructions, manage peripherals, and interface with external components. It follows standard microcontroller operation principles, including fetching, decoding, and executing instructions from program memory.

Detailed Application Field Plans

  • Embedded Control Applications: Industrial automation, robotics, automotive systems
  • IoT Devices: Sensor nodes, smart home devices, wearable technology
  • Consumer Electronics: Smart appliances, portable devices, audio/video equipment

Detailed and Complete Alternative Models

  • PIC32MX270F256D-I/TL
  • PIC32MX150F128D-I/TL
  • PIC32MX450F256H-I/TL

In conclusion, the PIC32MX250F128D-I/TL microcontroller offers high performance, low power consumption, and integrated peripherals, making it suitable for a wide range of embedded control, IoT, and consumer electronics applications.

[Word Count: 410]

প্রযুক্তিগত সমাধানে PIC32MX250F128D-I/TL এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is the maximum operating frequency of PIC32MX250F128D-I/TL?
    - The maximum operating frequency of PIC32MX250F128D-I/TL is 50 MHz.

  2. What are the key features of PIC32MX250F128D-I/TL?
    - Some key features of PIC32MX250F128D-I/TL include 128 KB flash memory, 32 KB RAM, USB 2.0 support, and multiple communication interfaces.

  3. Can PIC32MX250F128D-I/TL be used for real-time embedded systems?
    - Yes, PIC32MX250F128D-I/TL is suitable for real-time embedded systems due to its high performance and peripheral integration.

  4. What development tools are available for programming PIC32MX250F128D-I/TL?
    - Development tools such as MPLAB X IDE and MPLAB Harmony framework can be used for programming PIC32MX250F128D-I/TL.

  5. Is PIC32MX250F128D-I/TL suitable for low-power applications?
    - Yes, PIC32MX250F128D-I/TL offers low-power modes and features, making it suitable for low-power applications.

  6. What communication interfaces are supported by PIC32MX250F128D-I/TL?
    - PIC32MX250F128D-I/TL supports interfaces such as SPI, I2C, UART, and USB.

  7. Can PIC32MX250F128D-I/TL be used in industrial automation applications?
    - Yes, PIC32MX250F128D-I/TL is well-suited for industrial automation applications due to its robust features and performance.

  8. What are the security features available in PIC32MX250F128D-I/TL?
    - PIC32MX250F128D-I/TL offers security features such as code protection, tamper detection, and secure boot capabilities.

  9. Is PIC32MX250F128D-I/TL compatible with other microcontroller families?
    - PIC32MX250F128D-I/TL is compatible with other PIC32 families, allowing for scalability and flexibility in design.

  10. Are there any application notes or reference designs available for PIC32MX250F128D-I/TL?
    - Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC32MX250F128D-I/TL in various technical solutions.