PIC18F46J11T-I/PT

Product Overview

Category

The PIC18F46J11T-I/PT belongs to the category of microcontrollers.

Use

This microcontroller is widely used in various electronic applications that require embedded control and processing capabilities.

Characteristics

• High-performance 8-bit architecture
• Flash memory for program storage
• Integrated peripherals for enhanced functionality
• Low power consumption
• Wide operating voltage range
• Robust communication interfaces
• Extensive development tools and support

Package

The PIC18F46J11T-I/PT is available in a TQFP package, which stands for Thin Quad Flat Pack. This package offers a compact form factor and ease of integration into circuit boards.

Essence

The essence of the PIC18F46J11T-I/PT lies in its ability to provide efficient and reliable control and processing capabilities in a wide range of electronic applications.

Packaging/Quantity

This microcontroller is typically sold in reels or tubes, with each reel or tube containing a specific quantity of devices. The exact packaging and quantity may vary depending on the supplier.

Specifications

• Architecture: 8-bit
• Program Memory Size: 64 KB
• RAM Size: 3.8 KB
• Number of I/O Pins: 36
• Operating Voltage Range: 2.0V to 5.5V
• Maximum CPU Speed: 40 MHz
• Communication Interfaces: UART, SPI, I2C
• Analog-to-Digital Converter (ADC) Channels: 10-bit, 13 channels
• Timers: 8-bit and 16-bit timers
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC18F46J11T-I/PT has a total of 36 pins, each serving a specific purpose. The pin configuration is as follows:

1. VDD - Power supply voltage
2. RA0 - General-purpose I/O pin
3. RA1 - General-purpose I/O pin
4. RA2 - General-purpose I/O pin
5. RA3 - General-purpose I/O pin
6. RA4 - General-purpose I/O pin
7. RA5 - General-purpose I/O pin
8. VSS - Ground
9. RB0 - General-purpose I/O pin
10. RB1 - General-purpose I/O pin
11. RB2 - General-purpose I/O pin
12. RB3 - General-purpose I/O pin
13. RB4 - General-purpose I/O pin
14. RB5 - General-purpose I/O pin
15. RB6 - General-purpose I/O pin
16. RB7 - General-purpose I/O pin
17. RB8 - General-purpose I/O pin
18. RB9 - General-purpose I/O pin
19. RB10 - General-purpose I/O pin
20. RB11 - General-purpose I/O pin
21. RB12 - General-purpose I/O pin
22. RB13 - General-purpose I/O pin
23. RB14 - General-purpose I/O pin
24. RB15 - General-purpose I/O pin
25. VCAP - Capacitor connection for internal voltage regulator
26. VUSB - USB power supply
27. VBUS - USB bus voltage
28. RC0 - General-purpose I/O pin
29. RC1 - General-purpose I/O pin
30. RC2 - General-purpose I/O pin
31. RC3 - General-purpose I/O pin
32. RC4 - General-purpose I/O pin
33. RC5 - General-purpose I/O pin
34. RC6 - General-purpose I/O pin
35. RC7 - General-purpose I/O pin
36. OSC1/CLKI - Oscillator input

Functional Features

The PIC18F46J11T-I/PT offers a range of functional features that enhance its capabilities in various applications:

• Flash memory for program storage and easy reprogramming
• Integrated peripherals such as UART, SPI, and I2C for communication purposes
• Analog-to-Digital Converter (ADC) for precise analog signal measurements
• Timers for accurate timing control
• Low power consumption modes for energy-efficient operation
• Enhanced security features to protect sensitive data
• Extensive development tools and support from the manufacturer

Advantages and Disadvantages

Advantages

• High-performance 8-bit architecture enables efficient processing
• Wide operating voltage range allows compatibility with different power sources
• Robust communication interfaces facilitate seamless integration with other devices
• Low power consumption extends battery life in portable applications
• Extensive development tools and support simplify the design process

Disadvantages

• Limited program memory size compared to higher-end microcontrollers
• Relatively fewer I/O pins restricts the number of external devices that can be connected directly

Working