AT87LV52-16JC

Product Overview

Category

AT87LV52-16JC belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for controlling and processing data.

Characteristics

• High-performance 8-bit microcontroller
• Low-voltage operation
• 16 MHz clock frequency
• 52 kilobytes of programmable flash memory
• 2 kilobytes of RAM
• 32 general-purpose I/O pins
• Multiple communication interfaces (UART, SPI, I2C)
• On-chip timers and counters
• Analog-to-digital converter (ADC)

Package

AT87LV52-16JC is available in a 40-pin plastic dual in-line package (PDIP).

Essence

The essence of AT87LV52-16JC lies in its ability to provide efficient control and processing capabilities in a wide range of applications.

Packaging/Quantity

AT87LV52-16JC is typically packaged in reels or tubes, with each containing a specific quantity of microcontrollers. The exact packaging and quantity may vary depending on the supplier.

Specifications

• Microcontroller architecture: 8-bit
• Operating voltage: 2.7V to 5.5V
• Clock frequency: 16 MHz
• Flash memory: 52 KB
• RAM: 2 KB
• I/O pins: 32
• Communication interfaces: UART, SPI, I2C
• Timers/counters: Yes
• ADC resolution: 10-bit

Detailed Pin Configuration

The pin configuration of AT87LV52-16JC is as follows:

1. VCC - Power supply
2. P0.0 - General-purpose I/O pin
3. P0.1 - General-purpose I/O pin
4. P0.2 - General-purpose I/O pin
5. P0.3 - General-purpose I/O pin
6. P0.4 - General-purpose I/O pin
7. P0.5 - General-purpose I/O pin
8. P0.6 - General-purpose I/O pin
9. P0.7 - General-purpose I/O pin
10. RST - Reset pin
11. P1.0 - General-purpose I/O pin
12. P1.1 - General-purpose I/O pin
13. P1.2 - General-purpose I/O pin
14. P1.3 - General-purpose I/O pin
15. P1.4 - General-purpose I/O pin
16. P1.5 - General-purpose I/O pin
17. P1.6 - General-purpose I/O pin
18. P1.7 - General-purpose I/O pin
19. XTAL1 - Crystal oscillator input
20. XTAL2 - Crystal oscillator output
21. GND - Ground

Note: The remaining pins are not listed here for brevity.

Functional Features

AT87LV52-16JC offers the following functional features:

1. High-performance processing capabilities.
2. Low-voltage operation for power efficiency.
3. Ample programmable flash memory for storing code.
4. Sufficient RAM for data storage and manipulation.
5. Multiple communication interfaces for seamless integration with other devices.
6. On-chip timers and counters for precise timing control.
7. Analog-to-digital converter for capturing analog signals.

Advantages and Disadvantages

Advantages

• High-performance processing capabilities enable efficient execution of tasks.
• Low-voltage operation reduces power consumption.
• Ample programmable flash memory allows for complex program storage.
• Multiple communication interfaces facilitate easy connectivity with other devices.
• On-chip timers and counters provide accurate timing control.
• Analog-to-digital converter enables the capture of analog signals.

Disadvantages

• Limited RAM capacity may restrict the size and complexity of data manipulation.
• 8-bit architecture may not be suitable for certain applications requiring higher precision or processing power.

Working Principles

AT87LV52-16JC operates based on the principles of microcontroller architecture. It executes instructions stored in its flash memory, processes data using its internal resources, and communicates with external devices through various interfaces. The microcontroller's working principle involves fetching, decoding, and executing instructions to perform specific tasks as programmed.

Detailed Application Field Plans

AT87LV52-16JC finds application in various fields, including but not limited to:

1. Industrial automation: Control systems, monitoring devices, and data acquisition units.
2. Consumer electronics: Home appliances, remote controls, and gaming consoles.
3. Automotive: Engine management systems, dashboard displays, and vehicle diagnostics.
4. Internet of Things (IoT): Smart home devices, wearable technology, and sensor networks.
5. Medical devices: Patient monitoring systems, diagnostic equipment, and implantable devices.

Detailed and Complete