AT28C256E-15TI belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
This product is primarily used for non-volatile data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.
The AT28C256E-15TI is available in a standard 28-pin dual in-line package (DIP).
The essence of this product lies in its ability to store and retrieve digital information reliably and efficiently.
The AT28C256E-15TI is typically packaged in reels or tubes, with each containing a specific quantity of chips. The exact packaging and quantity may vary depending on the manufacturer.
The AT28C256E-15TI has a total of 28 pins, each serving a specific function. The pin configuration is as follows:
The AT28C256E-15TI utilizes a floating-gate transistor structure to store data. When programming, an electric charge is applied to the floating gate, altering its electrical characteristics and storing the desired information. Erasing is achieved by removing the charge from the floating gate using an electrical signal. The stored data can be read by applying appropriate voltage levels to the address and control pins.
The AT28C256E-15TI finds applications in various fields, including:
Sure! Here are 10 common questions and answers related to the application of AT28C256E-15TI in technical solutions:
Q: What is the AT28C256E-15TI? A: The AT28C256E-15TI is a high-performance, low-power CMOS 256K EEPROM (Electrically Erasable Programmable Read-Only Memory) integrated circuit.
Q: What is the operating voltage range for the AT28C256E-15TI? A: The AT28C256E-15TI operates within a voltage range of 4.5V to 5.5V.
Q: How much data can the AT28C256E-15TI store? A: The AT28C256E-15TI has a storage capacity of 256 kilobits or 32 kilobytes.
Q: What is the access time of the AT28C256E-15TI? A: The AT28C256E-15TI has an access time of 150 nanoseconds.
Q: Can the AT28C256E-15TI be reprogrammed? A: Yes, the AT28C256E-15TI is electrically erasable and programmable, allowing for multiple reprogramming cycles.
Q: What is the endurance of the AT28C256E-15TI? A: The AT28C256E-15TI has a minimum endurance of 100,000 erase/write cycles.
Q: Does the AT28C256E-15TI require any external power supply components? A: No, the AT28C256E-15TI does not require any external power supply components as it has an internal voltage generator.
Q: Can the AT28C256E-15TI operate in harsh environments? A: Yes, the AT28C256E-15TI is designed to operate in industrial temperature ranges (-40°C to +85°C) and is suitable for harsh environments.
Q: What interface does the AT28C256E-15TI use for communication? A: The AT28C256E-15TI uses a standard 8-bit parallel interface for communication with the microcontroller or other devices.
Q: Are there any special considerations for programming the AT28C256E-15TI? A: Yes, it is important to follow the recommended programming voltage and timing specifications provided in the datasheet to ensure proper programming and reliable operation.
Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the official datasheet and consult with technical experts for accurate information.