Intersil
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
ISL6841IBZ
বিস্তারিত দেখুন ডেটাশিট

ISL6841IBZ

Product Overview

Category

ISL6841IBZ belongs to the category of integrated circuits (ICs).

Use

The ISL6841IBZ is commonly used in power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • High efficiency
  • Compact size

Package

The ISL6841IBZ is available in a small outline package (SOIC) format.

Essence

The essence of ISL6841IBZ lies in its ability to efficiently manage power in various electronic devices.

Packaging/Quantity

The ISL6841IBZ is typically sold in reels containing a specific quantity, such as 2500 units per reel.

Specifications

The specifications for the ISL6841IBZ are as follows:

  • Input voltage range: 4.5V to 25V
  • Output voltage range: 0.8V to 5.5V
  • Maximum output current: 3A
  • Switching frequency: 300kHz to 2MHz
  • Operating temperature range: -40°C to 85°C

Detailed Pin Configuration

The ISL6841IBZ has the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. FB: Feedback pin
  4. COMP: Compensation pin
  5. SS/TR: Soft-start/Tracking pin
  6. VCC: Supply voltage
  7. BOOT: Bootstrap pin
  8. HO: High-side gate driver output
  9. LO: Low-side gate driver output

Functional Features

The ISL6841IBZ offers the following functional features:

  • Voltage mode control
  • Adjustable soft-start
  • Overcurrent protection
  • Undervoltage lockout
  • Thermal shutdown protection
  • Error amplifier with high gain

Advantages and Disadvantages

Advantages

  • High efficiency power management
  • Compact size for space-constrained applications
  • Wide input and output voltage range
  • Comprehensive protection features

Disadvantages

  • Limited maximum output current (3A)
  • Requires external components for complete functionality

Working Principles

The ISL6841IBZ operates on the principle of voltage mode control. It regulates the output voltage by comparing it with a reference voltage and adjusting the duty cycle of the switching signal accordingly. This allows for efficient power transfer from the input to the output.

Detailed Application Field Plans

The ISL6841IBZ is commonly used in the following application fields:

  1. Power supplies for computer systems
  2. Industrial automation equipment
  3. LED lighting systems
  4. Telecommunications devices
  5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the ISL6841IBZ are:

  1. LM5117: Voltage mode synchronous buck controller
  2. LT8610: High efficiency synchronous buck regulator
  3. TPS54332: Step-down DC-DC converter
  4. MAX15062: Integrated step-down converter
  5. LTC3892: Dual output synchronous step-down DC-DC controller

These alternative models provide options for designers based on specific requirements and preferences.

In conclusion, the ISL6841IBZ is an integrated circuit used for power management applications. Its compact size, high efficiency, and comprehensive protection features make it suitable for various electronic devices. While it has limitations in terms of maximum output current and external component requirements, there are alternative models available to cater to different design needs.

প্রযুক্তিগত সমাধানে ISL6841IBZ এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

Sure! Here are 10 common questions and answers related to the application of ISL6841IBZ in technical solutions:

1. What is ISL6841IBZ? ISL6841IBZ is a high-performance, single-ended current mode PWM controller designed for various power supply applications.

2. What are the key features of ISL6841IBZ? Some key features of ISL6841IBZ include adjustable switching frequency, programmable soft-start, cycle-by-cycle current limit, and integrated bootstrap diode.

3. What is the typical operating voltage range for ISL6841IBZ? The typical operating voltage range for ISL6841IBZ is between 4.5V and 14V.

4. Can ISL6841IBZ be used in both buck and boost converter topologies? Yes, ISL6841IBZ can be used in both buck and boost converter topologies, making it versatile for various power supply designs.

5. How does ISL6841IBZ handle overcurrent protection? ISL6841IBZ incorporates cycle-by-cycle current limit protection, which helps prevent excessive current flow and protects the power supply circuitry.

6. Does ISL6841IBZ have built-in thermal shutdown protection? Yes, ISL6841IBZ has built-in thermal shutdown protection that activates when the junction temperature exceeds a certain threshold, ensuring safe operation.

7. Can ISL6841IBZ operate at high switching frequencies? Yes, ISL6841IBZ can operate at high switching frequencies up to several hundred kilohertz, allowing for efficient power conversion.

8. Is ISL6841IBZ suitable for low-power applications? Yes, ISL6841IBZ is suitable for low-power applications as it offers excellent efficiency and low standby power consumption.

9. Can ISL6841IBZ be used in automotive applications? Yes, ISL6841IBZ is suitable for automotive applications as it meets the necessary requirements for automotive-grade components.

10. Are there any evaluation boards available for ISL6841IBZ? Yes, Intersil provides evaluation boards for ISL6841IBZ, which can help engineers quickly prototype and test their power supply designs.

Please note that these answers are general and may vary depending on specific application requirements.