IRFB260NPBF
Product Overview
Category
IRFB260NPBF belongs to the category of power MOSFETs.
Use
It is commonly used in power supply, motor control, and other high-power switching applications.
Characteristics
- High voltage capability
- Low on-resistance
- Fast switching speed
- Low gate charge
Package
The IRFB260NPBF is available in a TO-220AB package.
Essence
The essence of IRFB260NPBF lies in its ability to efficiently switch high currents with minimal power loss.
Packaging/Quantity
It is typically packaged in tubes or reels, with quantities varying based on manufacturer specifications.
Specifications
- Drain-Source Voltage (VDS): 200V
- Continuous Drain Current (ID): 50A
- RDS(ON) (Max) @ VGS = 10V: 0.04Ω
- Gate-Source Voltage (VGS): ±20V
- Total Power Dissipation (PD): 280W
Detailed Pin Configuration
The pin configuration of IRFB260NPBF is as follows: 1. Gate (G) 2. Drain (D) 3. Source (S)
Functional Features
- High voltage capability allows for use in various power applications.
- Low on-resistance minimizes power dissipation and improves efficiency.
- Fast switching speed enables rapid response in switching applications.
Advantages
- Suitable for high-power applications
- Low power dissipation
- Fast switching speed
Disadvantages
- May require careful handling due to high voltage capability
- Higher cost compared to lower power MOSFETs
Working Principles
IRFB260NPBF operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.
Detailed Application Field Plans
IRFB260NPBF is widely used in: - Power supplies - Motor control systems - Inverters - Switching regulators - DC-DC converters
Detailed and Complete Alternative Models
Some alternative models to IRFB260NPBF include: - IRFB3607PbF - IRFB4110PbF - IRFB7434PbF - IRFB4227PbF
In conclusion, IRFB260NPBF is a versatile power MOSFET with high voltage capability, low on-resistance, and fast switching speed, making it suitable for a wide range of high-power applications.
[Word count: 334]
প্রযুক্তিগত সমাধানে IRFB260NPBF এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন
What is the maximum drain-source voltage of IRFB260NPBF?
- The maximum drain-source voltage of IRFB260NPBF is 200 volts.
What is the continuous drain current rating of IRFB260NPBF?
- The continuous drain current rating of IRFB260NPBF is 50 amperes.
What is the on-state resistance (RDS(on)) of IRFB260NPBF?
- The on-state resistance (RDS(on)) of IRFB260NPBF is typically 0.04 ohms.
What is the gate-source voltage (VGS) for turning on IRFB260NPBF?
- The gate-source voltage (VGS) required to turn on IRFB260NPBF is typically 10 volts.
What are the typical applications of IRFB260NPBF in technical solutions?
- IRFB260NPBF is commonly used in applications such as motor control, power supplies, and DC-DC converters.
Is IRFB260NPBF suitable for high-frequency switching applications?
- Yes, IRFB260NPBF is suitable for high-frequency switching due to its low on-state resistance and fast switching characteristics.
Does IRFB260NPBF have built-in protection features?
- IRFB260NPBF does not have built-in protection features and may require external circuitry for overcurrent or overvoltage protection.
What is the operating temperature range of IRFB260NPBF?
- IRFB260NPBF has an operating temperature range of -55°C to 175°C.
Can IRFB260NPBF be used in automotive applications?
- Yes, IRFB260NPBF is suitable for automotive applications, provided it meets the specific requirements and standards for automotive electronics.
What are the key advantages of using IRFB260NPBF in technical solutions?
- The key advantages of using IRFB260NPBF include its high voltage and current ratings, low on-state resistance, and suitability for various power management applications.