Infineon Technologies
চিত্রটি উপস্থাপনা হতে পারে৷
পণ্যের বিবরণের জন্য স্পেসিফিকেশন দেখুন৷.
IRF1405ZSTRLPBF
বিস্তারিত দেখুন ডেটাশিট

IRF1405ZSTRLPBF

Product Overview

Category

The IRF1405ZSTRLPBF belongs to the category of power MOSFETs.

Use

It is commonly used in power management applications, such as motor control, DC-DC converters, and high-current switching.

Characteristics

  • High current capability
  • Low on-resistance
  • Fast switching speed
  • Low gate drive power
  • Avalanche energy specified

Package

The IRF1405ZSTRLPBF is typically available in a TO-263 package.

Essence

This power MOSFET is essential for efficient power handling and control in various electronic systems.

Packaging/Quantity

It is usually packaged in reels with a quantity of 800 units per reel.

Specifications

  • Drain-Source Voltage (Vdss): 55V
  • Continuous Drain Current (Id): 169A
  • RDS(ON) (Max) @ VGS = 10V: 8.0mΩ
  • Gate-Source Voltage (Vgs): ±20V
  • Power Dissipation (Pd): 200W

Detailed Pin Configuration

The pin configuration of the IRF1405ZSTRLPBF is as follows: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • Low gate charge
  • Enhanced body diode dv/dt and di/dt capability
  • Improved avalanche energy rating
  • RoHS compliant

Advantages and Disadvantages

Advantages

  • High current handling capacity
  • Low on-resistance for reduced power loss
  • Fast switching speed for improved efficiency
  • RoHS compliance for environmental friendliness

Disadvantages

  • Higher cost compared to standard MOSFETs
  • Requires careful consideration of heat dissipation due to high power dissipation

Working Principles

The IRF1405ZSTRLPBF operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient gate-source voltage is applied, the MOSFET enters the conducting state, allowing current to flow through it.

Detailed Application Field Plans

The IRF1405ZSTRLPBF finds extensive use in the following application fields: 1. Motor Control: Controlling the speed and direction of motors in industrial and automotive applications. 2. DC-DC Converters: Efficiently converting one voltage level to another in power supply systems. 3. High-Current Switching: Handling high currents in various electronic circuits and systems.

Detailed and Complete Alternative Models

Some alternative models to the IRF1405ZSTRLPBF include: - IRF1405PbF - IRF1405ZSPbF - IRF1405ZLPbF

In conclusion, the IRF1405ZSTRLPBF power MOSFET offers high-performance characteristics suitable for demanding power management applications, although it requires careful consideration of cost and heat dissipation. Its functional features and specifications make it a valuable component in various electronic systems.

Word Count: 410

প্রযুক্তিগত সমাধানে IRF1405ZSTRLPBF এর প্রয়োগ সম্পর্কিত 10টি সাধারণ প্রশ্ন ও উত্তর তালিকাভুক্ত করুন

  1. What is the maximum drain-source voltage of IRF1405ZSTRLPBF?

    • The maximum drain-source voltage of IRF1405ZSTRLPBF is 55V.

  2. What is the continuous drain current rating of IRF1405ZSTRLPBF?

    • The continuous drain current rating of IRF1405ZSTRLPBF is 169A.

  3. What is the on-state resistance (RDS(on)) of IRF1405ZSTRLPBF?

    • The on-state resistance (RDS(on)) of IRF1405ZSTRLPBF is typically 8.0mΩ.

  4. Can IRF1405ZSTRLPBF be used in automotive applications?

    • Yes, IRF1405ZSTRLPBF is suitable for use in automotive applications.

  5. What is the operating temperature range of IRF1405ZSTRLPBF?

    • The operating temperature range of IRF1405ZSTRLPBF is -55°C to 175°C.

  6. Does IRF1405ZSTRLPBF require a heatsink for high-power applications?

    • Yes, a heatsink is recommended for high-power applications to ensure proper thermal management.

  7. Is IRF1405ZSTRLPBF suitable for switching applications?

    • Yes, IRF1405ZSTRLPBF is well-suited for switching applications due to its low on-state resistance and high current rating.

  8. What are the typical applications for IRF1405ZSTRLPBF?

    • Typical applications for IRF1405ZSTRLPBF include motor control, power supplies, and DC-DC converters.

  9. What is the gate-source voltage (VGS) required to fully enhance IRF1405ZSTRLPBF?

    • The gate-source voltage (VGS) required to fully enhance IRF1405ZSTRLPBF is typically 10V.

  10. Is IRF1405ZSTRLPBF RoHS compliant?

    • Yes, IRF1405ZSTRLPBF is RoHS compliant, making it suitable for environmentally conscious designs.